7 Ways to Check for Water Damage in Your Stucco Home

  1. Damp-Looking Stucco – It shouldn’t be concerning if the stucco sometimes gets damp. The fact that it’s wet will make sense when it has rained. It nonetheless indicates that water has penetrated the stucco if it is still damp a week after the rainy weather. There might be areas of the wall that constantly seem moist. Pay special attention to them since water may be entering there.
  2. Cracks – An obvious indication that there is water in your stucco is a crack in it. Though it doesn’t necessarily mean that you have sustained permanent harm, you shouldn’t panic. You must act right away to prevent things from getting worse because it is a sign that water has entered the building.
  3. Missing Chunks of Stucco – Examine your stucco to check for any siding pieces that may have peeled off. Surface damage indicates that water has seeped underneath and is causing issues.
  4. Cracks and Bubbles at the Bottom of the Wall- Check the bottom edges for any obvious cracks or bubbles during your inspection. Water must follow gravity’s laws, just like everything else, or it will fall. Therefore, the majority of the damage may be located at the wall’s base.
  5. Window Caulking Damage – Do you see any cracks or holes in your window caulking?   Additionally, it indicates that water has penetrated the stucco. You will also need to replace those windows if it has been there for a significant amount of time. Regular stucco inspections are crucial because of this.
  6.  Soft Drywall – You’re heading inside to carry out your probe. Examine the drywall below your windows. When you touch it, does it feel soft? Another clear indication of water damage is that. In these situations, the outside stucco and that part of the drywall will need to be replaced.
  7.  Basement Moisture- And lastly, check the walls in your basement. You’ll observe that if the stucco contains water, it may result in moisture on the walls. However, since there are other potential causes, you should eliminate them before fixing the issue.